Two axis cutting table

JCD Series

Dual axis automatic cutting table specifications:

Maximum cutting diameter: 160-180mm

Minimum cutting width: 2mm

Cutting accuracy: +0.1mm

Cutting core diameter: 1 "-3"

Machine cutting effective width: 1.3-1.6m

Usage: Suitable for cutting BOPP/PVC/PE/ transparent tape/fine paper/double-sided tape/kraft paper tape, etc.

Features:

1. Drive part of the main machine: AC motor with inverter as cutting material drive, acceleration and deceleration is stable and fast.

2. Central control unit: Using programmable central control, multiple sizes can be set in the coaxial automatic conversion cutting.

3. Operation panel part: The operation interface adopts the LCD touch screen 10.4 inches, which can set various cutting conditions and monitor the operation status directly on the screen.

4. Motor control system: the central control system for PLC programmable controller, coaxial can be set a variety of sizes, cutting can be automatically adjusted according to the set size and number of cutting width.

5. Cutting coil positioning system: The use of Mitsubishi brand servo motor control, high-precision ball screw for dimensional positioning and the use of linear slide bearing tool holder; The positioning action is precise and smooth.

6. Feed positioning system: The use of Mitsubishi series brand servo motor control feed mode, can be anthropomorphic to do four-section speed feed cutting coil. Increase efficiency and get the best quality.

Seven. Round knife Angle adjustment: Use the Mitsubishi series brand servo motor to calculate the round knife Angle steering, according to different materials to do different Angle changes (Angle adjustment range ±8°) when the cutting plane is not good, you can directly change the cutting Angle. It can reduce the number of tool changes and improve production efficiency.

8. Knife seat part: double knife double axis design, up and down can be adjusted respectively, cutting depth can be adjusted, save PE pipe, convenient swing Angle.

9. Quick shaft changing device: This machine has a small cutting shaft to choose from, and adopts a quick shaft changing method to meet the needs of different tube core materials.