Slitting machine

Function: All kinds of paper, film and other materials slitting and rewinding.

Specifications:

* Maximum winding diameter: 800mm

* Coiling core diameter: 3-6"

* Manufacturing width: 1M-1.8M

* Maximum feeding diameter: 1200mm

* Minimum slitting width: 50mm

* Maximum mechanical speed: 300M/Min

Features 1. Coiling power part: two coiling motors cooperate with the main motor to do three-motor continuous control, the main motor separates the feeding motor and the winding motor to control the tension, the tension of the finished product is stable, and the appearance is beautiful.

2. Winding machine part: the winding shaft adopts slip system, which can automatically adjust the winding tension when winding, and the effect is better for materials with uneven thickness.

3. Motor control part: The operation interface adopts the LCD touch screen, which can directly set various winding conditions and operating conditions on the screen. The control part uses a programmable controller for mechanical action control, and has a self-testing system. When the machine fails, it can diagnose the fault cause by itself.

4. Flyover type walking: The material is used in the bridge type walking before the knife, which is convenient to operate and can prevent the static electricity on the material from absorbing the dust on the ground.

5. Auxiliary press wheel device: The material is equipped with a pneumatic press wheel mechanism before the feed, which can be used to press the material, and the tail material is not wasted and the material loss is reduced.

6. Basic discharge form: separate discharge stand, discharge diameter is large, and the space possibility of installing other devices is greater.

7. Auxiliary feeding of raw materials: using hydraulic power, suitable for workshops without driving, which can save manpower and shorten loading and unloading time.

Optional accessories

1. Discharge part muffler cover: reduce the noise generated when the material is rolled out and improve the quality and safety of the working environment (suitable for tape).

2. Ear material handling device: Optional independent or connected wire winding machine to pick up waste, in addition to strong windmill can be used for non-viscous materials.

3. Automatic line setting device: suitable for slitting after printing, which can be accurately aligned with the printing reference line for slitting.

4. Automatic tool arrangement mechanism: servo motor control automatic tool arrangement mechanism, convenient and simple, save time, reduce the possibility of harm to human body.

5. Automatic pushing mechanism: motor screw type automatic pushing mechanism, auxiliary pushing material, saving manpower.

6. Infrared paper tube: infrared paper tube device, saving time, paper tube and material end face combination is more perfect.

7. Auxiliary packing mechanism: the unloading arm can be equipped with a motor to pack materials, saving manpower and time.

8. Contact dust sticking mechanism: can be installed dust wheel type dust sticking mechanism, reduce the dust pollution to the material after the knife.

9. Online testing institutions: defects testing institutions can be installed according to customer requirements.